Tips To Avoid Problems With Your Outdoor Propane Heaters

Pouring concrete during the winter months can be a challenging task due to the cold temperatures interfering with the drying and curing process of the concrete. While propane tank heaters can be a highly effective solution for preventing the cold from causing problems for your concrete pour, it can be common for individuals to make simple oversights when it comes to caring for these heating systems. To help ensure that your concrete drying propane heaters are kept in the best condition possible, you should be mindful of the following few tips.

Invest In Propane Tank Heating Blankets

When you are using propane tanks in an outdoor setting, it is important to ensure that the tanks stay relatively warm. If you allow the propane tanks to become too cold, it can inhibit the ability of the propane to circulate. Fortunately, you can easily avoid this problem by investing in heating blankets for the propane storage tanks. These blankets will generate enough warmth to prevent the tanks from reaching freezing temperatures. By simply placing these blankets over the tanks, you can ensure that your heating system's propane stays warm enough to effectively flow throughout the system.

Clean The Heaters Before And After Each Use

Over the course of being used, it is possible for these heaters to become extremely dirty. Whether this is due to dirt and dust or propane residue accumulating around the burner, it is important for you to remove these substances from around the burner and any vents. Failure to perform this routine care can cause the heater to struggle to efficiently burn the propane. When cleaning the propane burner, you will want to thoroughly wipe it off with a damp cloth. By doing this simple maintenance before and after each use, you can make sure that your heater's burner is in the best condition possible.

Insect The Heaters For Visible Signs Of Corrosion

Corrosion can be a major problem for these heaters because they will often spend long periods of time outside. When corrosion forms, it can weaken the exterior of the heater. Eventually, this can lead to small holes forming in the casing of the heater, which can lead to heat loss and other performance compromising problems.

You will want to thoroughly inspect your heater for signs of corrosion before you use it. When corrosion is discovered, you will want to make sure that you are inspecting the exterior every few months for signs of corrosion. If you discover corroded portions of your heater, you will need to gently sand the rust to remove it and apply a waterproof metal sealant to the heater.